GENERATOR CONTROL MODULES

Are designed to monitor the AC Mains supply for under / over voltage, under / over frequency and voltage unbalance and provide a start command on detection of mains failure: ATS-105 or ATS-115

Are designed to monitor the AC Mains supply for under / over voltage, under / over frequency and voltage unbalance and provide a start command on detection of mains failure: ATS-105 or ATS-115

Mains Circuit Breaker (MCB) controlGenset Circuit Breaker (GCB) controlEngine and alternator protections monitoring (AMF)Remote start control and date / time shedulerModels of genset controllers: GC-250 / GC-315 / GC-360

Mains Circuit Breaker (MCB) controlGenset Circuit Breaker (GCB) controlEngine and alternator protections monitoring (AMF)Remote start control and date / time shedulerModels of genset controllers: GC-250 / GC-315 / GC-360

Entry level Synchro/Parallel controller perfect for rental gensets too. GC-400 is well recommended in case of Multiple Prime Mover or Multiple Stand-By power stations. In this last case an external logic (i.e. ATS-115) is required for the detection of the mains failure and the signal of start/stop to the stand-by gensets.

The MC400 controller is used were one or more mains supplies are required to parallel with the GC400 generator bus.

GC-600 and GC-600 MainNew Powerful Synchro/Parallel controller for Island mode and Mains parallel functions with integrated PLC operations. Enhanced colour display as standard. Huge set of communication serial ports on board. Available in different versions in coherence to the type of the plant.

The MC200 controllers is used were one or more mains supplies are  required to parallel with  the generator bus, it also features a powerful PLC to ensure site specific design details can be accommodated. A large full colour display presents operating status in a clear easy to view format. A generous input and output capability with the ability to add expansion where needed, means complex sites can be tackled with ease.

When the load is supplied by several gensets connected on a bus and working in parallel, we talk about SYNCHRO/PARALLEL applications. For example big factories, hospitals, data center need more then one genset able to supply the load in case of mains failure. Additionally, in case of desert plants where the mains is not available, it’s required the power of several gensets in order to supply the load.

The BTB 200 controller provides the ability to control a bus tie breaker, for applications were it is necessary to divide the common bus during certain operating conditions. A large full colour display makes presents operating status in a clear easy to view format. Combined with generous input and output capability with the ability to add expansion where needed, means complex sites can be tackled with ease

An additional remote display and control location for DST4602 Evolution controllers. Up to 5 remote locations can be fitted to the DST4602 Evolution controller.

Full colour touch screen for visualisation of the controller. Particularly suitable fo Co-Generation (CHP) plants where it is required to visualise and control both electrical and thermal performance of the system.